QcomDloader Flash Tool is specially designed for flashing firmware on Qualcomm Android devices. Using this tool you can flash stock or custom ROM on your Android device. It’ also provides firmware update on your device in few steps. This tool supports Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista and Windows XP. In this article, we provide the latest version of QcomDloader setup for download.
QcomDloader supports almost all the Qualcomm Devices. So if you have a device which has Qualcomm processor you can try this tool for firmware update purpose. This tool has advanced settings which are most important to Qualcomm users. A few of them are eMMC programmer, Chipset Number, RAW program, Download mode enabler. This tool is very easy to use and we also add instructions to guide you to flash using this tool.
Also Check: MTK FRP Tool
Before you use this tool you have to download stock firmware files according to your phone model. Make sure to check below files in your downloaded firmware folder. If you have these three files you can use this tool without any issues. If it not there QcomDloader Tool will not recognize the firmware.
- Prog_emmc_firehose_8XXX.mbn (8xxx is chipset number)
How to flash Qualcomm device using QcomDloader
- Download Official firmware for your device and place it on pc. (Do google search according to the model number of your device)
- Download “QcomDloader flash tool” from below download section and extract it.
- Make sure to install USB drivers for your device. (important)
- Now launch “QcomDloader.exe” file as administrator
- Then Connect the device via USB cable to PC.
- Click on “Gear” icon to load firmware of the device. (Browse for firmware)
- Once loaded the stock ROM/Firmware of your device, click on “Setting” button
- Select Download Mode as Upgrade
- Under “Download Settings“, Tick mark on Validate Downloaded ROM
- Then Leave the eMMC programmer, Raw Program, Patch0 box options as it is.
(But in case, the name of the requested file is not same then you have to change it. Otherwise, leave it as it is.)
- This tool will read all the above important files automatically. But if the file names change then rewrite the exact name in QcomDloader tool. Otherwise, it will not recognize the firmware.
- Now click ok if it’s everything according to above instructions.
- finally, click on “Play” button to start the flashing process.
- After completing flashing, you will see Green “[Removed] Passed” message in QcomDloader tool window.
If you have any sort of problem related to this tool or in the process of downloading then share it through commenting below. We are always here to help you and we will try to solve it as soon as possible.